ITERAS

Featured Product

The Iso-Fluidic Inertial Decoupler Mk 2.5 is available in two payload configurations, or as a dual-configuration bundle. Every unit ships complete with a chest-mount harness, a storage stand, and a set of three APM auxiliary payload mounts (APM-30, APM-45, APM-60) at no additional cost — only the cradle geometry changes between configurations.

Material care note: the IFID platform is printed in PLA (polylactic acid), with a TPU (thermoplastic polyurethane) insert in the wine glass cradle for grip. PLA can soften under prolonged heat exposure — avoid leaving units in direct sun, hot vehicles, or near grills/fire pits for extended periods. Standard outdoor and tailgate use in moderate conditions is fine.

Wine Glass Configuration

A wearable beverage stabilization platform utilizing passive inertial isolation technology.

Designed to maintain wine glass stability during walking, social gatherings, and other dynamic operating conditions.

View Technical Data Order — $79.99

Includes chest-mount harness. At checkout, select Wine Glass from the configuration dropdown. See Dual Configuration Bundle below to add the 12 oz can cradle.

Ships with the included storage stand, fully compatible with this configuration.

Cradle uses a TPU insert (the rest of the platform is PLA) as the resting pad for the base of the glass, providing grip and cushioning where it contacts the cradle.

12 oz Can Configuration

Same passive isolation platform, re-cradled for standard 12 oz (355 mL) beverage cans.

Engineered for tailgates, backyard operations, and other high-vibration social environments.

View Technical Data Order — $79.99

Includes chest-mount harness. At checkout, select 12 oz Can from the configuration dropdown. See Dual Configuration Bundle below to add the wine glass cradle.

Note: the included storage stand currently only accommodates the wine glass cradle. A can-compatible stand is in development — this configuration ships without a usable stand for now.

Best Value

+

Dual Configuration Bundle

One IFID Mk 2.5 unit — not two — shipped with both cradle attachments in the box. Swap between wine glass and 12 oz (355 mL) can support by changing the cradle, no second purchase required.

Order Both Cradles — $94.99

Ships as a single IFID platform with one harness and two interchangeable cradles (wine glass + 12 oz can). $15 savings versus ordering two single-configuration units separately.

Note: the included storage stand currently only accommodates the wine glass cradle. A can-compatible stand is in development — bundle orders ship with one wine-glass-compatible stand only.

Wine glass cradle uses a TPU insert (the rest of the platform, including the can cradle, is PLA) as the resting pad for the base of the glass, providing grip and cushioning where it contacts the cradle.

APM Series Auxiliary Payload Mount Family — fixed and adjustable angle hardware

The APM series is Iteras' line of 3D-printable auxiliary payload mounts, available in four fixed angles and one fully adjustable variant. Each mount uses a standard 3-prong tripod-style buckle, compatible with GoPro and most similarly-mounted action cameras, lights, and accessories — not exclusive to the IFID platform. Optimized for FDM printing with minimal supports. Each assembly consists of three printed parts — STL downloads include the full set.

Note: APM-30, APM-45, and APM-60 are already included free with every IFID order. The listings below are for spares, replacements, or for use with other 3-prong mount accessories — APM-0 and APM-A are not included with IFID orders and are available here as standalone purchases.

Material care note: all APM mounts (and the IFID platform itself) are printed in PLA. PLA softens and can deform under prolonged heat exposure — avoid leaving units in direct sun, hot vehicles, or near grills/fire pits for extended periods. Standard outdoor and tailgate use in moderate conditions is fine.

APM-0

Fixed 0° Auxiliary Payload Mount

A flat, zero-degree mount for direct forward-facing shots. The simplest and most rigid mount in the series — ideal as a baseline reference angle.

Mount Angle	0°
Camera-Side Mount	3-Prong Buckle
Base Mounting	Screw-Mountable to Any Surface
Material	PLA

Download STL Order Printed Version — $9.99

STL download includes all 3 assembly parts (.zip)

APM-30

Fixed 30° Auxiliary Payload Mount

Angles the camera 30° from flat, useful for helmet and chest mounting positions where a slight upward tilt is needed to level the horizon.

Mount Angle	30°
Camera-Side Mount	3-Prong Buckle
Base Mounting	Screw-Mountable to Any Surface
Material	PLA

Download STL Order Printed Version — $9.99

STL download includes all 3 assembly parts (.zip)

APM-45

Fixed 45° Auxiliary Payload Mount

A mid-range angled mount for side-mounted or roll-cage positions, balancing forward and downward field of view.

Mount Angle	45°
Camera-Side Mount	3-Prong Buckle
Base Mounting	Screw-Mountable to Any Surface
Material	PLA

Download STL Order Printed Version — $9.99

STL download includes all 3 assembly parts (.zip)

APM-60

Fixed 60° Auxiliary Payload Mount

A steep-angle mount for downward-facing or close-quarters shots, commonly used on handlebar and low-mount positions.

Mount Angle	60°
Camera-Side Mount	3-Prong Buckle
Base Mounting	Screw-Mountable to Any Surface
Material	PLA

Download STL Order Printed Version — $9.99

STL download includes all 3 assembly parts (.zip)

APM-A

Adjustable Auxiliary Payload Mount

A ratcheting, field-adjustable mount that covers the full 0°–60° range in a single part — trades a small amount of rigidity for total flexibility.

Mount Angle	0°–60° (adjustable)
Camera-Side Mount	3-Prong Buckle
Base Mounting	Screw-Mountable to Any Surface
Material	PLA

Download STL Order Printed Version — $9.99

STL download includes all 3 assembly parts (.zip)

Technical Specifications

Validation Testing